What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model YL030GB1 — 2.0 MFD with Clamp | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YL030GB1 — 2.0 MFD with Clamp | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Round Run Capacitor for YL030GB1 — 2.0 MFD with Clamp | Ships Today

Name: ICP Round Run Capacitor for YL030GB1 — 2.0 MFD with Clamp | Ships Today
Brand: ICP
SKU: 1095021
Price: 24.64 USD
Availability: InStock

SKU: 1095021 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM 2.0 MFD round run capacitor (part number 1095021) with mounting clamp for the ICP/Tempstar/Heil YL030GB1 heat pump. A run capacitor stores and releases energy to give the motor it serves a steady, efficient phase shift while running. A 2.0 MFD capacitor of this size typically supports a small motor or auxiliary load in the condensing unit. When a run capacitor weakens or fails, the connected motor may hum but not start, start slowly, overheat, draw high amps, or shut down on thermal overload. Replacing a failed capacitor is one of the most common and lowest-cost HVAC repairs.

Specifications

Spec	Value
Part Number	1095021
Type	Round Run Capacitor (single)
Brand	ICP / Tempstar / Heil
Capacitance	2.0 MFD
Mounting	Includes round clamp
Fits Model	YL030GB1

Compatibility

Direct OEM replacement for the 2.0 MFD round capacitor originally installed on the ICP/Tempstar/Heil YL030GB1 and equivalent units that shipped with part 1095021. Confirm the MFD rating stamped on your old capacitor before replacing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; discharge the old capacitor across its terminals before handling.
Access — Remove the unit's electrical service panel.
Document — Photograph all wire positions on the capacitor terminals before disconnecting.
Remove — Pull the spade connectors, loosen the mounting clamp, and lift out the failed capacitor.
Install — Secure the new capacitor with the clamp and reconnect each lead exactly per your photo.
Test — Restore power and confirm the motor starts smoothly and runs at normal amperage.

Signs You Need a Replacement

Motor hums but won't start, or starts sluggishly
Capacitor top is bulged, swollen, or leaking
Measured capacitance is below the 2.0 MFD rating
Motor overheats or trips on thermal overload

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Round Run Capacitor for YL03...

$24.64

Frequently Asked Questions

Does this Capacitor fit my ICP YL030GB1 — 2.0 MFD with Clamp | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP YL030GB1 — 2.0 MFD with Clamp | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP YL030GB1 — 2.0 MFD with Clamp | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu