ICP Round Run Capacitor 7.5 MFD 370V for RGS210LEEA0AAAA — Oval | Ships Today

Overview

This is the OEM round/oval run capacitor for the ICP (Tempstar/Heil) RGS210LEEA0AAAA gas furnace, rated 7.5 MFD at 370 volts. A run capacitor provides the steady phase-shifted current that keeps the inducer or blower motor turning smoothly and efficiently. As it weakens, the motor pulls excess amperage, overheats, hums without starting, or trips on overload. This listing bundles the capacitor (OEM 1176150), the mounting plate (OEM 1183001), and the oval clamp (OEM 1171552) for a complete replacement.

Specifications

Compatibility

Engineered for the ICP RGS210LEEA0AAAA and shared across many ICP-family furnaces badged as Tempstar, Heil, Comfortmaker, and Arcoaire that use a 7.5 MFD / 370V oval run capacitor. Confirm your existing capacitor reads 7.5 MFD at 370V before ordering.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter before touching the capacitor terminals.
2. Access — Remove the furnace service panel to expose the control area and capacitor.
3. Document — Photograph all wire connections before disconnecting anything.
4. Remove — Discharge the old capacitor across its terminals with an insulated screwdriver, label and disconnect the leads, then loosen the oval clamp and lift it out.
5. Install — Secure the new capacitor in the clamp and plate, then reconnect each wire exactly per your photo.
6. Test — Restore power and confirm the motor starts immediately and runs without humming or overheating.

Signs You Need a Replacement

• Motor hums but will not start, or starts slowly
• Bulged, leaking, or swollen capacitor top
• Capacitance reads low or open on a meter
• Motor trips on thermal overload or short-cycles

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.