What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model YG036GC1 — 370V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG036GC1 — 370V | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Round Run Capacitor 2.5 MFD for YG036GC1 — 370V | Ships Today

Name: ICP Round Run Capacitor 2.5 MFD for YG036GC1 — 370V | Ships Today
Brand: ICP
SKU: 1051476
Price: 23.34 USD
Availability: InStock

SKU: 1051476 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This 2.5 MFD round run capacitor (OEM part number 1051476) supplies the steady phase-shifted current that keeps the motor on your ICP/Tempstar/Heil YG036GC1 unit running smoothly. Rated at 370 volts, it ships with the mounting clamp for secure installation. Run capacitors are a leading cause of HVAC no-start and overheating motor failures — when a capacitor weakens, the motor draws excess current, hums, or won't start at all. This genuine OEM replacement restores the correct microfarad rating your motor needs.

Specifications

Spec	Value
Part Number	1051476
Type	Round Run Capacitor (single)
Brand	ICP / Tempstar / Heil
Capacitance	2.5 MFD
Voltage Rating	370V
Includes	Mounting clamp
Fits Model	YG036GC1

Compatibility

Direct-fit replacement for the ICP/Tempstar/Heil YG036GC1. The 2.5 MFD value is application-specific — confirm the microfarad and voltage stamped on your existing capacitor match 2.5 MFD / 370V before replacing.

Installation Guide

Safety First — Disconnect power and verify zero voltage; discharge the old capacitor across its terminals with an insulated screwdriver before touching it.
Access — Remove the service panel to expose the capacitor.
Document — Photograph the wire colors and terminals before disconnecting.
Remove — Loosen the clamp, pull the spade connectors, and lift out the old capacitor.
Install — Secure the new capacitor in the clamp and reconnect the leads per your photo.
Test — Restore power and confirm the motor starts and runs without humming.

Signs You Need a Replacement

Motor hums but won't start
Bulging, leaking, or swollen capacitor top
Intermittent operation or frequent overheating trips
Measured capacitance reads outside ±6% of 2.5 MFD

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Round Run Capacitor 2.5 MFD ...

$23.34

Frequently Asked Questions

Does this Capacitor fit my ICP YG036GC1 — 370V | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP YG036GC1 — 370V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP YG036GC1 — 370V | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu