What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model YG036GB1 — 370V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG036GB1 — 370V | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Round Run Capacitor 2.5 MFD for YG036GB1 — 370V | Ships Today

Name: ICP Round Run Capacitor 2.5 MFD for YG036GB1 — 370V | Ships Today
Brand: ICP
SKU: 1064218
Price: 23.34 USD
Availability: InStock

SKU: 1064218 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This 2.5 MFD round run capacitor (OEM part number 1064218) provides the continuous phase-shifted current that keeps the motor on your ICP/Tempstar/Heil YG036GB1 running smoothly. Rated at 370 volts and supplied with a mounting clamp, it restores the precise microfarad value your motor was designed for. Weak or failed run capacitors are among the most frequent HVAC service calls — a degraded capacitor causes the motor to hum, draw excess current, overheat, or fail to start. This genuine OEM replacement gets the system back to spec.

Specifications

Spec	Value
Part Number	1064218
Type	Round Run Capacitor (single)
Brand	ICP / Tempstar / Heil
Capacitance	2.5 MFD
Voltage Rating	370V
Includes	Mounting clamp
Fits Model	YG036GB1

Compatibility

Direct-fit replacement for the ICP/Tempstar/Heil YG036GB1. Capacitor values are application-specific — confirm the microfarad and voltage printed on your existing capacitor match 2.5 MFD / 370V before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage; discharge the old capacitor across its terminals with an insulated screwdriver before handling.
Access — Remove the service panel to reach the capacitor.
Document — Photograph the wire colors and terminal positions before disconnecting.
Remove — Loosen the clamp, pull the spade connectors, and lift out the old capacitor.
Install — Secure the new capacitor in the clamp and reconnect the leads per your photo.
Test — Restore power and confirm the motor starts and runs without humming.

Signs You Need a Replacement

Motor hums but fails to start
Bulging, leaking, or swollen capacitor
Intermittent operation or repeated overheating
Measured capacitance falls outside ±6% of 2.5 MFD

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Round Run Capacitor 2.5 MFD ...

$23.34

Frequently Asked Questions

Does this Capacitor fit my ICP YG036GB1 — 370V | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP YG036GB1 — 370V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP YG036GB1 — 370V | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu