What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model WPG3304040LKC1 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3304040LKC1 | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Round Run Capacitor 2.0 MFD for WPG3304040LKC1 | Ships Today

Name: ICP Round Run Capacitor 2.0 MFD for WPG3304040LKC1 | Ships Today
Brand: ICP
SKU: 1095021
Price: 24.64 USD
Availability: InStock

SKU: 1095021 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2.0 MFD round run capacitor provides the phase-shifted starting and running torque for a motor in your ICP WPG3304040LKC1 system — typically a fan or auxiliary motor. A run capacitor stores and releases electrical energy to keep the motor turning smoothly and efficiently. As capacitors age they lose capacitance (drift below the rated 2.0 MFD), bulge, or short out, which causes the motor to hum, struggle to start, overheat, or fail entirely. This listing includes the OEM round capacitor and its mounting clamp (OEM 1095021). Always discharge a capacitor with an insulated resistor before handling, and replace with the exact MFD and voltage rating to protect the motor.

Specifications

Spec	Value
Part Number	1095021
Type	Single Run Capacitor, Round
Brand	ICP (Tempstar / Heil)
Capacitance	2.0 MFD
Mounting	Round with clamp
Fit	OEM Replacement

Compatibility

Fits the ICP / Tempstar / Heil WPG3304040LKC1 packaged unit and other ICP-family equipment specifying a 2.0 MFD round run capacitor. Confirm the MFD rating and voltage on your existing capacitor before ordering.

Installation Guide

Safety First — Disconnect power at the breaker and disconnect switch, then verify zero voltage with a multimeter.
Access — Remove the service/electrical access panel.
Document — Photograph the capacitor terminal wiring before disconnecting, then discharge the capacitor across its terminals with an insulated resistor.
Remove — Disconnect the leads, loosen the mounting clamp, and remove the failed capacitor.
Install — Secure the new capacitor in its clamp and reconnect the leads to match your photo.
Test — Restore power and verify the motor starts and runs smoothly.

Signs You Need a Replacement

Motor hums but will not start or starts slowly.
Visibly bulged, leaking, or burst capacitor top.
Measured capacitance has drifted below the 2.0 MFD rating.
Motor overheats or trips on thermal overload.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Round Run Capacitor 2.0 MFD ...

$24.64

Frequently Asked Questions

Does this Capacitor fit my ICP WPG3304040LKC1 | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP WPG3304040LKC1 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP WPG3304040LKC1 | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu