What are the specs for this Pressure Switch?

The correct replacement for ICP model WPG4604115RKA1 — Tubing Pressure Switch | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG4604115RKA1 — Tubing Pressure Switch | Ships Today.

ICP

ICP Pressure Switch for WPG4604115RKA1 — Tubing Pressure Switch | Ships Today

Name: ICP Pressure Switch for WPG4604115RKA1 — Tubing Pressure Switch | Ships Today
Brand: ICP
SKU: WPG4604115RKA1
Price: 42.84 USD
Availability: InStock

SKU: WPG4604115RKA1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM tubing pressure switch (part number 1178417) for the ICP Tempstar Heil WPG4604115RKA1 packaged gas/electric unit. The pressure switch is a critical safety device that monitors draft and venting pressure through its connected sensing tubing. It verifies that the inducer/draft motor is moving combustion gases correctly before the control board permits ignition. When pressure is correct, the switch closes and allows the heating sequence to continue; if venting is blocked or the inducer fails, the switch stays open and locks out the burner to prevent unsafe operation. A failed or drifting switch is one of the most common causes of intermittent no-heat and ignition lockout faults.

Specifications

Spec	Value
Part Number	1178417
Type	Tubing Pressure Switch
Brand	ICP (Tempstar / Heil)
Function	Draft / vent pressure proving
Fitment	OEM direct replacement

Compatibility

Engineered for the ICP Tempstar Heil WPG4604115RKA1 packaged unit and other ICP-family package equipment using this switch. Always confirm the part number stamped on your existing switch matches 1178417 before installing.

Installation Guide

Safety First — Disconnect power at the unit disconnect and verify zero voltage with a multimeter.
Access — Remove the service/control panel to reach the pressure switch and inducer assembly.
Document — Photograph the wiring and tubing routing before disconnecting anything.
Remove — Detach the sensing tube(s) and the electrical spade terminals, then unscrew the switch from its bracket.
Install — Mount the new switch, reconnect the tubing exactly as photographed, and reattach the spade terminals.
Test — Restore power, initiate a heat call, and confirm the inducer starts, the switch closes, and ignition completes.

Signs You Need a Replacement

Furnace locks out with a pressure-switch or limit fault code
Inducer runs but burners never ignite
Intermittent no-heat that clears after a reset
Switch fails to close even with clear venting and tubing

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Pressure Switch for WPG46041...

$42.84

Frequently Asked Questions

Does this Pressure Switch fit my ICP WPG4604115RKA1 — Tubing Pressure Switch | Ships Today?

Yes. This is the factory-specified OEM pressure switch for the ICP WPG4604115RKA1 — Tubing Pressure Switch | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my ICP WPG4604115RKA1 — Tubing Pressure Switch | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu