What MFD capacitor do I need for my ICP AC?

The correct replacement for ICP model RHS060L0CA0AAA — OEM 1171552 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHS060L0CA0AAA — OEM 1171552 | Ships Today.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

ICP

ICP Oval Run Capacitor 45+5 MFD for RHS060L0CA0AAA — OEM 1171552 | Ships Today

Name: ICP Oval Run Capacitor 45+5 MFD for RHS060L0CA0AAA — OEM 1171552 | Ships Today
Brand: ICP
SKU: 1171552
Price: 33.80 USD
Availability: InStock

SKU: 1171552 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM oval dual run capacitor (part number 1171552) for the ICP / Tempstar / Heil RHS060L0CA0AAA system. A dual run capacitor provides the phase shift that starts and runs both the compressor and the condenser fan motor. Rated 45+5 MFD at 440V, it is one of the most common failure points in a condenser. A weak or failed capacitor causes hard starts, humming, a fan that won't spin, or a compressor that trips on overload.

Specifications

Spec	Value
Part Number	1171552
Type	Dual Run, Oval
Brand	ICP (Tempstar / Heil)
Rating	45 + 5 MFD
Voltage	440V (370V compatible)

Compatibility

Direct OEM replacement for the ICP RHS060L0CA0AAA model, and shared across ICP, Tempstar, Heil, and Comfortmaker units using part 1171552. Confirm the MFD rating stamped on your existing capacitor before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the service panel to expose the capacitor.
Document — Photograph all terminal connections (HERM, FAN, C) before disconnecting.
Remove — Discharge the capacitor across the terminals with an insulated resistor, then loosen the mounting strap and remove leads.
Install — Mount the new capacitor, match wires to HERM/FAN/C per your photo.
Test — Restore power and confirm the compressor and fan start cleanly.

Signs You Need a Replacement

Bulging or leaking capacitor top
Fan or compressor hums but won't start
System short-cycles or trips on overload
MFD reading out of tolerance on a meter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Oval Run Capacitor 45+5 MFD ...

$33.80

Frequently Asked Questions

Does this Capacitor fit my ICP RHS060L0CA0AAA — OEM 1171552 | Ships Today?

Yes. This is the factory-specified OEM capacitor for the ICP RHS060L0CA0AAA — OEM 1171552 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my ICP RHS060L0CA0AAA — OEM 1171552 | Ships Today?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu