What are the specs for this Control Board?

The correct replacement for ICP model RGS091LSCA0AAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091LSCA0AAA — OEM | Ships Today.

ICP

ICP Integrated Furnace Control Board Kit for RGS091LSCA0AAA — OEM | Ships Today

Name: ICP Integrated Furnace Control Board Kit for RGS091LSCA0AAA — OEM | Ships Today
Brand: ICP
SKU: 1183618
Price: 220.94 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part 1183618) is the integrated furnace control (IFC) brain of the ICP (Tempstar/Heil) RGS091LSCA0AAA gas furnace. It sequences ignition, monitors the safety circuits (limits, pressure switch, flame sense), and controls blower and inducer timing. A failed board causes erratic behavior — no ignition, short cycling, blower running constantly, or a dead furnace. This genuine ICP kit restores correct, reliable sequencing and includes the mounting and connection hardware to swap it in.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Tempstar / Heil
Function	Ignition, blower, inducer & safety sequencing
Fitment	OEM

Compatibility

Built for the ICP RGS091LSCA0AAA furnace and used across related ICP-built Tempstar, Heil, and Comfortmaker furnace platforms. Match the board's connector layout and part number to your existing control before ordering.

Installation Guide

Safety First — Disconnect electrical power and verify zero voltage with a multimeter. Shut off gas before servicing.
Access — Remove the blower compartment service panel.
Document — Photograph every wire harness and connector on the old board before unplugging.
Remove — Unplug all connectors, release the board standoffs, and lift out the old control.
Install — Mount the new board, transfer each connector to the matching terminal per your photo, and confirm all plugs are fully seated.
Test — Restore gas and power, then run a full heat cycle to verify ignition, flame sense, and blower handoff.

Signs You Need a Replacement

Furnace completely dead with power confirmed at the board
No ignition sequence or inducer start on a call for heat
Blower runs continuously or fails to start
Diagnostic LED shows a hard-lockout or internal control fault

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Integrated Furnace Control B...

$220.94

Frequently Asked Questions

Does this Control Board fit my ICP RGS091LSCA0AAA — OEM | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS091LSCA0AAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS091LSCA0AAA — OEM | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu