What are the specs for this Control Board?

The correct replacement for ICP model RGX048KECA0AAA — Ignition Control Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGX048KECA0AAA — Ignition Control Kit | Ships Today.

ICP

ICP Integrated Furnace Control Board for RGX048KECA0AAA — Ignition Control Kit | Ships Today

Name: ICP Integrated Furnace Control Board for RGX048KECA0AAA — Ignition Control Kit | Ships Today
Brand: ICP
SKU: 1183618
Price: 245.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM integrated furnace control board kit (part number 1183618) for the ICP / Tempstar / Heil RGX048KECA0AAA gas furnace. The control board is the brain of the furnace — it manages the ignition sequence, sequences the inducer motor, gas valve, and hot surface igniter, monitors flame via the flame sensor, controls blower timing, and runs continuous safety diagnostics. It operates on 120V line power and supplies 24V to the low-voltage control circuit. When this board fails, the furnace typically will not respond to a call for heat, locks out after failed ignition attempts, short-cycles, or throws diagnostic LED fault codes. Replacing the board restores reliable ignition and safe operation.

Specifications

Spec	Value
Part Number	1183618 (KIT CONTROL BOARD)
Type	Integrated Furnace Control (IFC)
Brand	ICP / Tempstar / Heil
Line Voltage	120V AC
Control Voltage	24V AC
Fit	OEM Replacement Kit

Compatibility

Engineered as a direct-fit replacement for the ICP / Tempstar / Heil RGX048KECA0AAA gas furnace. This board kit also services many related RGX-series furnaces built on the same platform under the ICP family of brands (Heil, Tempstar, Comfortmaker, Arcoaire). Always confirm the part number on your existing board before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace blower-compartment service panel.
Document — Photograph every wire and connector on the existing board before disconnecting anything.
Remove — Label and unplug each harness, then remove the mounting screws and lift out the old board.
Install — Mount the new board in the same orientation and reconnect each harness exactly per your photos.
Test — Restore power, initiate a call for heat, and verify the full ignition sequence and blower operation; confirm no fault codes on the diagnostic LED.

Signs You Need a Replacement

Furnace does not respond at all to a thermostat call for heat
Igniter, inducer, or gas valve fails to energize in sequence
Repeated ignition lockouts or short-cycling
Diagnostic LED flashing a board or control fault code

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Integrated Furnace Control B...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP RGX048KECA0AAA — Ignition Control Kit | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGX048KECA0AAA — Ignition Control Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGX048KECA0AAA — Ignition Control Kit | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu