What igniter fits my ICP furnace?

The correct replacement for ICP model RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Ignitor Electrode for RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today

Name: ICP Ignitor Electrode for RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today
Brand: ICP
SKU: 1179966
Price: 38.94 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP ignitor electrode (OEM part 1179966) is the spark ignition component for the RGS303LFFA0AAAA gas furnace. It produces the high-voltage spark that lights the burner gas on each heating cycle and, in many setups, doubles as the flame-sensing electrode. A cracked insulator, eroded tip, or carbon buildup leads to failed ignition, repeated lockouts, and short cycling. Installing the correct OEM electrode restores dependable burner light-off and accurate flame proving.

Specifications

Spec	Value
Part Number	1179966
Type	Ignitor / Spark Electrode
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Burner Ignition
Fitment	OEM Replacement

Compatibility

Designed for the ICP/Tempstar/Heil RGS303LFFA0AAAA gas furnace and related RGS-series models sharing the 1179966 ignition assembly. Confirm your model and part number on the unit rating plate before ordering.

Installation Guide

Safety First — Shut off gas and disconnect electrical power; verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the electrode position, gap, and wire routing before removal.
Remove — Disconnect the ignition lead and remove the mounting screw(s); lift the old electrode clear of the burner.
Install — Mount the new electrode, set it to the same position and spark gap, and reconnect the ignition lead per your photo.
Test — Restore gas and power, cycle the furnace, and confirm a clean spark, burner light-off, and stable flame.

Signs You Need a Replacement

Furnace sparks but burners fail to light
Repeated ignition lockouts or nuisance flame faults
Cracked ceramic insulator or corroded/carbon-fouled electrode tip
Intermittent ignition and short cycling on a call for heat

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Ignitor Electrode for RGS303...

$38.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS303LFFA0AAAA — OEM 1179966 Spark Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu