ICP Ignitor Electrode for RGS213LFCA0AAAA — OEM Direct Ignition | Ships Today

Overview

This OEM ignitor electrode (part number 1179966) is the ignition component for the gas heat section of your ICP RGS213LFCA0AAAA packaged unit. On a heat call, the control board energizes the igniter to light the main burners, and the electrode confirms a clean, reliable ignition sequence. A cracked, fouled, or worn igniter electrode is one of the most common causes of furnace no-heat and ignition lockout faults. Typical failure symptoms include the burners failing to light, the unit short-cycling on ignition, repeated lockouts after several ignition attempts, and visible cracks, carbon buildup, or erosion on the electrode tip.

Specifications

Compatibility

Designed as the factory-correct ignition electrode for the ICP / Tempstar / Heil RGS213LFCA0AAAA gas heat section. Confirm the bracket geometry and gas orientation match your existing igniter before installing.

Installation Guide

1. Safety First — Disconnect power at the disconnect and breaker, shut off the gas supply, and verify zero voltage with a multimeter.
2. Access — Remove the service panel to reach the burner and ignition assembly.
3. Document — Photograph the igniter wiring and mounting position before removing it.
4. Remove — Disconnect the igniter lead, remove the mounting screw(s), and withdraw the old electrode without touching the ceramic.
5. Install — Mount the new igniter by its bracket only, never the element, and reconnect the lead per your photo.
6. Test — Restore gas and power, then verify a clean ignition and stable burner flame on a heat call.

Signs You Need a Replacement

• Burners will not light on a heat call
• Repeated ignition lockout after several failed attempts
• Visible cracks, carbon, or erosion on the electrode tip
• Short-cycling or intermittent no-heat during cold weather

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.