What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210HFEA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210HFEA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Ignitor Electrode for RGS210HFEA0AAAA — OEM 1179966 | Ships Today

Name: ICP Ignitor Electrode for RGS210HFEA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 41.60 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignitor electrode (part number 1179966) provides the ignition source for the burners on the ICP/Heil/Tempstar RGS210HFEA0AAAA gas furnace. On each heat call the control board energizes the ignitor to light the gas at the burner, and the same or a paired electrode confirms flame. A cracked ceramic, eroded tip, or open electrode prevents the furnace from lighting — the inducer and gas valve may cycle but no flame is established, often locking the board out after several failed attempts. Replacing it with the genuine OEM electrode restores fast, dependable ignition and proper flame confirmation.

Specifications

Spec	Value
Part Number	1179966
Type	Ignitor Electrode
Brand	ICP / Heil / Tempstar
Application	Gas Furnace Burner Ignition
Fit	OEM Replacement

Compatibility

Designed for the ICP/Heil/Tempstar RGS210HFEA0AAAA and other RGS-family gas furnaces that use OEM ignitor electrode 1179966. Confirm the part number and bracket orientation against your existing electrode before ordering, as ignitor geometry is model-specific.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the electrode position, gap, and wire routing before removal.
Remove — Disconnect the ignition lead and unscrew the electrode from the burner assembly. Handle the ceramic carefully and avoid touching the new tip.
Install — Mount the new electrode at the original gap and orientation, then reconnect the ignition lead.
Test — Restore gas and power and confirm the burners light promptly and flame is sensed on the first ignition attempt.

Signs You Need a Replacement

Furnace cycles the inducer and gas valve but never lights.
Control board locks out after repeated failed ignition attempts.
Cracked ceramic insulator or eroded/burned electrode tip.
Intermittent ignition or delayed, rough light-off.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Ignitor Electrode for RGS210...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS210HFEA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210HFEA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210HFEA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu