ICP Igniter Electrode for RGS244HEEA0AAAA — OEM 1179966 | Ships Today

Overview

The 1179966 igniter electrode is the OEM ignition component for the ICP Tempstar Heil RGS244HEEA0AAAA gas furnace. On a call for heat, the control board energizes the igniter, which heats to glowing temperature and lights the burner gas. Because it cycles through extreme heating and cooling on every call, the igniter is a common wear item — the brittle element eventually cracks or burns open. When it fails, the furnace runs its inducer and gas valve sequence but never lights, then locks out. Installing the correct OEM igniter restores fast, reliable ignition.

Specifications

Compatibility

Designed as the factory replacement igniter electrode for the ICP Tempstar Heil RGS244HEEA0AAAA and related furnaces that use the 1179966 igniter. Match the connector and mounting bracket to your existing part before installing.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment door to reach the igniter.
3. Document — Photograph the igniter position and wiring before removal.
4. Remove — Unplug the connector, remove the mounting screw, and withdraw the old igniter without touching the element.
5. Install — Mount the new igniter by its bracket only — never touch the element with bare fingers — and reconnect the plug.
6. Test — Restore power and run a heat cycle, confirming the igniter glows and the burners light promptly.

Signs You Need a Replacement

• Furnace runs the ignition sequence but burners never light
• Igniter does not glow on a call for heat
• Visible cracks, breaks, or white spots on the element
• Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.