ICP Igniter Electrode for RGS214HTAA0AAAA — Direct Spark Ignition | Ships Today

Overview

This genuine OEM igniter electrode (part 1179966) is the ignition component for the ICP / Heil / Tempstar RGS214HTAA0AAAA furnace. The electrode creates the high-voltage spark that lights the burner gas at the start of every heat cycle and, on many platforms, also serves the flame-sensing function that proves the burner has lit. A cracked ceramic insulator, eroded electrode tip, or carbon buildup will cause weak or missing ignition, repeated ignition lockouts, and intermittent no-heat calls. Replacing a worn electrode restores reliable, fast burner light-off and steady flame proving.

Specifications

Compatibility

Direct-fit replacement for the ICP / Heil / Tempstar RGS214HTAA0AAAA and related RGS-series furnaces that use this electrode assembly. Confirm the bracket and ceramic geometry match the original before installing.

Installation Guide

1. Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the electrode wiring and bracket position before disconnecting.
4. Remove — Disconnect the high-voltage lead, remove the mounting screw, and withdraw the old electrode.
5. Install — Mount the new electrode, set the spark gap per spec, and reconnect the ignition lead.
6. Test — Restore gas and power, start a heat cycle, and confirm a strong spark and stable burner flame.

Signs You Need a Replacement

• Cracked or chipped ceramic insulator
• Weak, intermittent, or no spark at the burner
• Repeated ignition lockouts or no-heat calls
• Carbon-fouled or eroded electrode tip

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.