What igniter fits my ICP furnace?

The correct replacement for ICP model RGS213SSAA0AAAA — OEM Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213SSAA0AAAA — OEM Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Igniter Electrode for RGS213SSAA0AAAA — OEM Ignition | Ships Today

Name: ICP Igniter Electrode for RGS213SSAA0AAAA — OEM Ignition | Ships Today
Brand: ICP
SKU: 1179966
Price: 48.04 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM igniter electrode (P/N 1179966) is the ignition component for ICP, Heil, and Tempstar gas furnaces. The electrode generates the spark/ignition source that lights the burner gas at the start of each heating cycle. A cracked ceramic insulator, eroded electrode tip, or incorrect gap prevents reliable ignition, causing hard starts, delayed ignition "whumps," or a furnace that locks out after several failed trials for ignition. Replacing a worn igniter electrode restores fast, consistent light-off and prevents repeated lockouts.

Specifications

Spec	Value
Part Number	1179966
Type	Igniter Electrode
Brand	ICP / Heil / Tempstar
Function	Burner Ignition
Application	Gas Furnace

Compatibility

Fits ICP / Heil / Tempstar / Comfortmaker gas furnaces using model RGS213SSAA0AAAA. Direct OEM replacement for the original ignition electrode in this furnace.

Installation Guide

Safety First — Turn off gas and disconnect electrical power; verify zero voltage with a multimeter.
Access — Remove the burner compartment door/service panel.
Document — Photograph the electrode position, gap, and wire routing before removing.
Remove — Disconnect the ignition lead and unscrew the electrode bracket from the burner assembly.
Install — Mount the new electrode, confirm correct gap and alignment to the burner, and reconnect the ignition lead.
Test — Restore gas and power, start a heating cycle, and confirm prompt ignition without delay or lockout.

Signs You Need a Replacement

Furnace clicks/sparks but burner won't light
Delayed ignition with a loud "whoomp" at startup
Repeated ignition lockouts after several trials
Cracked ceramic insulator or visibly eroded electrode tip

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Igniter Electrode for RGS213...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP RGS213SSAA0AAAA — OEM Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS213SSAA0AAAA — OEM Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS213SSAA0AAAA — OEM Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu