What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Igniter Electrode for RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today

Name: ICP Igniter Electrode for RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today
Brand: ICP
SKU: 1179966
Price: 44.20 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM igniter electrode (part number 1179966) provides the ignition spark for ICP / Tempstar / Heil gas furnaces. Mounted at the burner, the electrode delivers a high-voltage spark to light the burner gas at the start of each heat cycle. Over time the electrode tip erodes, cracks, or becomes carbon-fouled, which weakens or eliminates the spark and causes ignition failures. A failing electrode is a leading cause of a furnace that clicks or attempts to start but never lights, locks out after several ignition tries, or short-cycles on heat. Replacing the electrode restores a clean, consistent spark and reliable burner ignition.

Specifications

Spec	Value
Part Number	1179966
Type	Igniter Electrode (Spark)
Ignition Style	Direct Spark
Application	Gas Furnace Burner
Brand	ICP / Tempstar / Heil
Fit	OEM Replacement

Compatibility

Fits ICP, Tempstar, Heil, Comfortmaker, and Arcoaire gas furnaces that use the 1179966 igniter electrode, including model RGS210SRAA0AAAA. Confirm the electrode part number and burner mounting position before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage at the control board with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the electrode position, gap, and ignition wire routing before removal.
Remove — Disconnect the ignition lead and unscrew the old electrode from the burner assembly.
Install — Mount the new electrode, set the correct spark gap, and reconnect the ignition lead per your photo.
Test — Restore gas and power, then confirm a strong spark and clean burner ignition on a heat call.

Signs You Need a Replacement

Furnace clicks/sparks but burner never lights
System locks out after repeated ignition attempts
Weak, intermittent, or no visible spark
Cracked ceramic insulator or eroded/carbon-fouled electrode tip

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Igniter Electrode for RGS210...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210SRAA0AAAA — Direct Spark Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu