What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210HDCA0AAAA — OEM Direct Spark | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210HDCA0AAAA — OEM Direct Spark | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Igniter Electrode for RGS210HDCA0AAAA — OEM Direct Spark | Ships Today

Name: ICP Igniter Electrode for RGS210HDCA0AAAA — OEM Direct Spark | Ships Today
Brand: ICP
SKU: 1179966
Price: 37.70 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM igniter electrode (part 1179966) generates the spark that lights the burner in your ICP/Heil/Tempstar RGS210HDCA0AAAA furnace. The electrode tip carries the high-voltage spark across a precise gap to ignite gas at startup. Over time the electrode erodes, cracks at the ceramic insulator, or develops a carbon path that weakens the spark — leading to ignition lockouts, delayed lights with a small 'whump,' or no heat at all.

Specifications

Spec	Value
Part Number	1179966
Type	Spark Igniter Electrode
Brand	ICP / Heil / Tempstar
Application	Direct spark furnace ignition

Compatibility

Fits ICP, Heil, and Tempstar RGS210HDCA0AAAA and related RGS210 series furnaces using the 1179966 igniter electrode. Confirm against your unit's parts list before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power, verify zero voltage with a multimeter.
Access — Remove the burner compartment panel.
Document — Photograph the electrode position, gap, and ignition wire routing.
Remove — Disconnect the high-voltage lead and unscrew the electrode from the burner bracket.
Install — Mount the new electrode, set it to the specified spark gap, and reconnect the ignition lead.
Test — Restore gas and power, call for heat, and confirm a strong spark and clean burner light.

Signs You Need a Replacement

Furnace locks out on ignition failure
Weak, intermittent, or no visible spark
Cracked ceramic insulator or eroded electrode tip
Delayed ignition with a noticeable 'whump'

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Igniter Electrode for RGS210...

$37.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS210HDCA0AAAA — OEM Direct Spark | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210HDCA0AAAA — OEM Direct Spark | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210HDCA0AAAA — OEM Direct Spark | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu