What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180SRCA0AAAA — OEM 1184216 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180SRCA0AAAA — OEM 1184216 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Spark Igniter for RGS180SRCA0AAAA — OEM 1184216 | Ships Today

Name: ICP Hot Surface Spark Igniter for RGS180SRCA0AAAA — OEM 1184216 | Ships Today
Brand: ICP
SKU: 1184216
Price: 41.60 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM spark igniter (part number 1184216) is the ignition component for your ICP/Tempstar/Heil RGS180SRCA0AAAA gas furnace. It generates the high-voltage spark that ignites the burner gas on each heating cycle. When an igniter weakens or cracks, the furnace will short-cycle, fail to light, or lock out after several failed trials for ignition. Replacing it with a genuine OEM sparker restores reliable, on-demand ignition and prevents repeated no-heat calls.

Specifications

Spec	Value
Part Number	1184216
Type	Spark Igniter / Ignitor
Brand	ICP (Tempstar / Heil)
Fitment	OEM Direct Replacement
Application	Gas Furnace Ignition

Compatibility

Engineered as a direct OEM fit for the ICP/Tempstar/Heil RGS180SRCA0AAAA furnace and related RGS180 series models that use the 1184216 ignition assembly.

Installation Guide

Safety First — Disconnect power at the service switch and verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter lead and remove the mounting screw; lift the old sparker clear of the burner.
Install — Mount the new igniter, set the spark gap per spec, and reconnect the lead per your photo.
Test — Restore gas and power, then run a heat cycle and confirm clean ignition.

Signs You Need a Replacement

Furnace clicks but burners fail to light
Repeated ignition lockouts or short-cycling on a call for heat
Visible cracks, carbon buildup, or erosion on the igniter tip
Intermittent no-heat that clears after a reset

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Spark Igniter fo...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS180SRCA0AAAA — OEM 1184216 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180SRCA0AAAA — OEM 1184216 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180SRCA0AAAA — OEM 1184216 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu