What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180LFEA0AAAA — OEM 1184216 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180LFEA0AAAA — OEM 1184216 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface/Spark Igniter for RGS180LFEA0AAAA — OEM 1184216 | Ships Today

Name: ICP Hot Surface/Spark Igniter for RGS180LFEA0AAAA — OEM 1184216 | Ships Today
Brand: ICP
SKU: 1184216
Price: 35.10 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM igniter/sparker assembly (part number 1184216) for the ICP/Tempstar/Heil RGS180LFEA0AAAA gas furnace. The igniter is responsible for lighting the burners on each heat call. When it fails, the furnace blower may run but produce no heat, the unit may lock out after several failed ignition attempts, or you may hear repeated clicking without a flame. A cracked element, carbon buildup, or a hairline fracture from thermal cycling are the most common failure modes. Using the exact OEM part ensures correct resistance, mounting alignment, and gas-train timing.

Specifications

Spec	Value
Part Number	1184216
Description	Igniter / Sparker
Type	Ignition component
Brand	ICP (Tempstar / Heil)
Fits Model	RGS180LFEA0AAAA
Fit	Direct OEM replacement

Compatibility

Engineered for the ICP/Tempstar/Heil RGS180LFEA0AAAA furnace. ICP shares chassis and ignition components across several Tempstar, Heil, and Comfortmaker furnaces — verify your existing part number is 1184216 before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then shut off the gas supply. Verify zero voltage with a multimeter.
Access — Remove the furnace burner/control compartment service panel.
Document — Photograph the igniter wiring and mounting orientation before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s); withdraw the old igniter carefully without touching the element.
Install — Mount the new igniter, handling it only by the ceramic base, and reconnect the wiring per your photo.
Test — Restore gas and power, initiate a heat call, and confirm the igniter glows/sparks and the burners light cleanly.

Signs You Need a Replacement

Furnace fails to light or locks out after repeated ignition attempts
No glow or spark visible during the ignition sequence
Visible cracks, blistering, or carbon on the element
Intermittent no-heat calls in cold weather

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface/Spark Igniter fo...

$35.10

Frequently Asked Questions

Does this Igniter fit my ICP RGS180LFEA0AAAA — OEM 1184216 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180LFEA0AAAA — OEM 1184216 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180LFEA0AAAA — OEM 1184216 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu