What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210SEAA0AAAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210SEAA0AAAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Ignitor Electrode for RGS210SEAA0AAAA | Ships Today

Name: ICP Hot Surface Ignitor Electrode for RGS210SEAA0AAAA | Ships Today
Brand: ICP
SKU: 1179966
Price: 48.04 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignitor electrode (part 1179966) is the hot surface igniter for the ICP Tempstar Heil RGS210SEAA0AAAA gas furnace. On each heat call the furnace control sends voltage to the igniter, which glows white-hot to light the gas burners. Hot surface igniters are fragile and degrade over time — the element develops hairline cracks, weakens, and eventually fails to reach ignition temperature. A failed igniter is the single most common cause of no-heat calls: the inducer and gas valve sequence normally, but the burners never light and the furnace locks out. Installing a fresh OEM igniter restores dependable, on-demand ignition.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Ignitor Electrode
Operating Voltage	120V
Brand	ICP / Heil / Tempstar
Fit	OEM Replacement

Compatibility

Built for the ICP RGS210SEAA0AAAA and related ICP, Heil, Tempstar, and Comfortmaker furnaces using the 1179966 igniter electrode. Confirm the mounting bracket and connector match your existing igniter before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and harness routing before removal.
Remove — Unplug the igniter connector and remove the mounting screw; handle the new element by its base only, never the ceramic.
Install — Mount the new igniter, ensuring correct gap and alignment to the burner, and reconnect the harness.
Test — Restore power and gas, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace cycles but burners never ignite (no-heat lockout)
Visible cracks or a broken igniter element
Igniter glows weakly or not at all
Repeated ignition-failure fault codes

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Ignitor Electrod...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP RGS210SEAA0AAAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210SEAA0AAAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210SEAA0AAAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu