What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150HRCB0AAAA — HSI | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150HRCB0AAAA — HSI | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter with Wiring Kit for RGS150HRCB0AAAA — HSI | Ships Today

Name: ICP Hot Surface Igniter with Wiring Kit for RGS150HRCB0AAAA — HSI | Ships Today
Brand: ICP
SKU: 1171306
Price: 46.80 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (OEM 1171306) with matching wiring kit (OEM 1188370) provides reliable furnace ignition on the ICP / Tempstar / Heil RGS150HRCB0AAAA rooftop gas/electric package unit. On a call for heat, the control board energizes the igniter, which glows red-hot to ignite gas at the burners. The included wiring kit ensures a clean, correct connection to the harness. Hot surface igniters are brittle and wear out over time, becoming a top cause of no-heat calls. A cracked element, weak glow, or open circuit prevents ignition and triggers lockouts. Installing a fresh OEM igniter restores dependable startup every cycle.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter (HSI)
Brand	ICP / Tempstar / Heil
Application	Furnace / gas ignition
Fitment	OEM

Compatibility

Designed for the ICP RGS150HRCB0AAAA package unit and related ICP, Tempstar, Heil, and Comfortmaker gas/electric models using this hot surface igniter. The wiring kit adapts the igniter to the unit's harness for a correct connection.

Installation Guide

Safety First — Shut off gas, disconnect power, and verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photo the igniter position and wiring routing before removal. Never touch the new element with bare fingers — oils cause hot spots.
Remove — Unplug the igniter connector and unfasten the mounting screw.
Install — Mount the new igniter at the correct burner position, connect the wiring kit, and route the harness away from heat.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

No glow or weak/uneven glow on a heat call
Visible cracks or breaks in the ceramic element
Furnace locks out after failed ignition attempts
Open circuit or out-of-range resistance reading

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter with Wir...

$46.80

Frequently Asked Questions

Does this Igniter fit my ICP RGS150HRCB0AAAA — HSI | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150HRCB0AAAA — HSI | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150HRCB0AAAA — HSI | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu