What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102SRAB0AAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102SRAB0AAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter with Wiring Kit for RGS102SRAB0AAA — OEM | Ships Today

Name: ICP Hot Surface Igniter with Wiring Kit for RGS102SRAB0AAA — OEM | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.70 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) with its matching wiring kit (part 1188370) lights the burners in your ICP RGS102SRAB0AAA gas furnace. On each call for heat, the control board sends voltage to the igniter, which glows white-hot and ignites the gas as the valve opens. Hot surface igniters are fragile and degrade with every heat cycle; the silicon carbide or nitride element grows brittle and eventually cracks or fails to reach ignition temperature. The result is no heat, repeated ignition lockouts, or a furnace that cycles on the limit. Replacing the igniter — along with its dedicated wiring harness — restores fast, reliable ignition and eliminates intermittent no-heat faults.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot surface igniter
Brand	ICP (Heil / Tempstar / Comfortmaker)
Application	Furnace burner ignition
Fitment	OEM replacement

Compatibility

Built for the ICP / Heil / Tempstar RGS102SRAB0AAA gas furnace and related ICP-family models using the same hot surface igniter and connector. The included wiring kit ensures a correct, sealed connection to the furnace harness.

Installation Guide

Safety First — Shut off gas, disconnect power, and verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the old igniter harness and unscrew the igniter bracket; handle the new element by the ceramic base only, never the glowing surface.
Install — Mount the new igniter, connect the new wiring kit, and route the harness per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No ignition or delayed ignition on a heat call
Furnace locks out after several ignition attempts
Visibly cracked or broken igniter element
Igniter glows weakly or not at all

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter with Wir...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS102SRAB0AAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102SRAB0AAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102SRAB0AAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu