ICP Hot Surface Igniter with Wiring Kit for RGS090SFBA0AGAA — OEM 1171306 | Ships Today

Overview

This genuine ICP OEM repair kit pairs the hot surface igniter (part 1171306) with its matching igniter wiring kit (part 1188370) for the RGS090SFBA0AGAA gas furnace. The hot surface igniter glows red-hot when energized by the control board to light the burners on each heat call. Igniters are a leading cause of no-heat calls — the silicon nitride/carbide element is brittle and degrades with thermal cycling, and the original pigtail harness often becomes heat-damaged or brittle. Replacing both together ensures a reliable connection and avoids a repeat failure at the connector. Always handle the igniter by its housing, never the element.

Specifications

Compatibility

Designed for the ICP RGS090SFBA0AGAA and related Heil, Tempstar, and Comfortmaker furnaces using this hot surface igniter. Confirm the mounting bracket and connector match your original igniter before installing.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment door to reach the igniter.
3. Document — Photograph the igniter position, bracket, and harness routing before removal.
4. Remove — Unplug the old igniter harness, remove the mounting screw, and lift the igniter out — handling it only by the ceramic base.
5. Install — Mount the new igniter (do not touch the element), route and connect the new wiring kit, and verify clearance from the burner.
6. Test — Restore power, start a heat call, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

• No heat — burners never ignite on a call
• Igniter does not glow or glows weakly
• Visible cracks or breaks in the igniter element
• Brittle, melted, or discolored igniter harness

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.