What igniter fits my ICP furnace?

The correct replacement for ICP model WFAR100C048B1 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR100C048B1 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter with Bracket for WFAR100C048B1 | Ships Today

Name: ICP Hot Surface Igniter with Bracket for WFAR100C048B1 | Ships Today
Brand: ICP
SKU: 1184324
Price: 51.94 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit pairs the igniter element (part #1176919, IGNITER) with its dedicated mounting bracket (part #1184324, BRACKET IGNITER) for the ICP/Heil/Tempstar WFAR100C048B1 gas furnace. On each call for heat the control board energizes the igniter, which glows red-hot to ignite the burner gas. Hot surface igniters are brittle and are the single most common ignition-related failure: the element cracks from thermal cycling, contamination, or handling, and once it can no longer reach ignition temperature the furnace locks out with no heat. Supplying the correct bracket alongside the element ensures the new igniter sits at the exact factory position relative to the burner flame for reliable light-off. Never touch the igniter element with bare fingers — skin oils create hot spots that shorten its life.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Application	Gas Furnace Ignition
Fitment	OEM

Compatibility

Built for the ICP/Heil/Tempstar WFAR100C048B1 gas furnace and matching WFAR-series models using this hot surface igniter and bracket assembly.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position, bracket orientation, and wire routing.
Remove — Unplug the igniter harness, unbolt the bracket, and lift out the cracked element without touching the new one's surface.
Install — Mount the new bracket and igniter to the factory location, handling the element by its ceramic base only, and reconnect the harness.
Test — Restore gas and power and confirm the igniter glows and lights the burners on a heat call.

Signs You Need a Replacement

Furnace locks out with no ignition
Igniter does not glow on a call for heat
Visible crack or break in the igniter element
Repeated ignition-failure lockouts on the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter with Bra...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP WFAR100C048B1 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFAR100C048B1 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFAR100C048B1 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu