ICP Hot Surface Igniter & Wiring Kit for RGS150SFAA0AGAA — OEM 1171306 | Ships Today

Overview

This genuine OEM hot surface igniter (Part #1171306) with its matching igniter wiring kit (Part #1188370) fits the ICP/Heil/Tempstar RGS150SFAA0AGAA gas furnace. The hot surface igniter glows red-hot when the control board calls for heat, lighting the burner gas. Igniters are a consumable wear item — they grow brittle with every heating cycle and eventually crack or lose continuity, producing a classic no-heat condition where the inducer runs and the gas valve opens but the burners never light. The included wiring kit replaces brittle or heat-damaged igniter leads to prevent intermittent ignition faults.

Specifications

Compatibility

Direct OEM replacement for the ICP/Heil/Tempstar RGS150SFAA0AGAA and other furnaces specifying igniter 1171306. Verify the part number against your furnace's service label before ordering.

Installation Guide

1. Safety First — Shut off gas and power to the furnace, and verify zero voltage with a multimeter before servicing.
2. Access — Remove the burner compartment door to reach the igniter and burner assembly.
3. Document — Photograph the igniter position and wiring connector before removal. Handle the new igniter only by its ceramic base — never touch the silicon nitride element.
4. Remove — Unplug the igniter connector and remove the mounting screw(s), then withdraw the old igniter from the burner assembly.
5. Install — Mount the new igniter at the original depth and alignment, then connect the new wiring kit per your photo.
6. Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

• No heat — inducer runs but burners never ignite
• Igniter does not glow or glows weakly
• Visible cracks or breaks in the igniter element
• Intermittent ignition lockouts or repeated retries

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.