What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150HSAA0AGAA — Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150HSAA0AGAA — Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS150HSAA0AGAA — Silicon Nitride | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS150HSAA0AGAA — Silicon Nitride | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine ICP ignition kit includes the hot surface igniter (OEM 1171306) and the matching igniter wiring kit (OEM 1188370) for the RGS150HSAA0AGAA gas furnace. The hot surface igniter glows incandescent when energized by the control board, lighting the burners at the start of each heat cycle, while the wiring kit provides the correct connector and high-temperature leads to power it. The igniter element is brittle and degrades with every cycle — a cracked or open igniter is the single most common reason a furnace ignites no flame and locks out on no-heat.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter + Wiring Kit
Brand	ICP (Tempstar / Heil)
Element	Silicon nitride hot surface
Voltage	120V
Fit	OEM Replacement

Compatibility

Designed for the ICP / Tempstar / Heil RGS150HSAA0AGAA and related furnaces using the same hot surface igniter and connector. Confirm igniter shape and connector type before ordering.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter. The igniter element is fragile — handle only by the bracket.
Access — Remove the furnace burner compartment panel.
Document — Photo the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter lead, remove the mounting screw, and lift out the old igniter without touching the element.
Install — Mount the new igniter, install the wiring kit connector, and route leads away from heat per your photo.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light reliably.

Signs You Need a Replacement

Furnace tries to ignite but produces no flame
Igniter doesn't glow or glows weakly
Visible crack or break in the igniter element
Repeated no-heat lockouts after several ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS150HSAA0AGAA — Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150HSAA0AGAA — Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150HSAA0AGAA — Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu