What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120SFAA0AGAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120SFAA0AGAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS120SFAA0AGAA | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS120SFAA0AGAA | Ships Today
Brand: ICP
SKU: 1171306
Price: 42.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM kit includes the hot surface igniter (part 1171306) and matching igniter wiring kit (part 1188370) for the ICP/Heil/Tempstar RGS120SFAA0AGAA gas furnace. On a call for heat, the control sends voltage to the igniter, which glows red-hot to light the burners. Igniters are brittle and degrade with every cycle, eventually cracking or failing open. The included wiring kit replaces the connector and harness so you get a clean, reliable connection. A bad igniter is one of the most common causes of no-heat calls.

Specifications

Spec	Value
Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot surface igniter
Brand	ICP / Heil / Tempstar
Application	Gas furnace burner ignition
Includes	Igniter + wiring/connector kit

Compatibility

Direct OEM fit for the ICP/Heil/Tempstar RGS120SFAA0AGAA furnace and RGS-series units specifying igniter 1171306 with wiring kit 1188370.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; allow a hot igniter to cool.
Access — Remove the burner/service panel.
Document — Photograph the igniter position and harness routing before disconnecting.
Remove — Unplug the igniter connector and unscrew the old igniter; handle the new one by its base only — never touch the ceramic element.
Install — Mount the new igniter, install the new wiring kit, and reconnect the harness.
Test — Restore power, start a heat cycle, and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

No heat / burners fail to light on a call
Igniter does not glow or glows weakly
Visible cracks or breaks in the ceramic element
Open circuit when the igniter is ohm-tested

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS120SFAA0AGAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120SFAA0AGAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120SFAA0AGAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu