What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120SEAB0AAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120SEAB0AAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS120SEAB0AAA | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS120SEAB0AAA | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This kit pairs the genuine OEM hot surface igniter (part 1171306) with the matching igniter wiring kit (part 1188370) for ICP/Tempstar/Heil gas furnaces. The hot surface igniter glows red-hot when energized to light the burners on each heat call; the included wiring kit provides the correct harness/connector so the new igniter terminates cleanly to the control board. Igniters are brittle and have a finite number of heating cycles — they crack, develop hairline fractures, or simply burn out, which is one of the most common causes of furnace no-heat calls. Replacing the igniter together with fresh wiring eliminates the intermittent connector and pigtail failures that often accompany an aged igniter.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter + Wiring Kit
Application	Gas furnace burner ignition
Brand	ICP / Tempstar / Heil

Compatibility

Fits ICP, Tempstar, Heil, and Comfortmaker gas furnaces including model RGS120SEAB0AAA. Confirm the igniter mounting tab and connector style against your original before installing.

Installation Guide

Safety First – Disconnect electrical power and verify zero voltage with a multimeter; never handle the igniter element with bare fingers.
Access – Remove the burner compartment service panel.
Document – Photograph the igniter position and harness routing before disconnecting.
Remove – Unplug the igniter connector, remove the mounting screw(s), and withdraw the fragile igniter without bumping the ceramic.
Install – Mount the new igniter, attach the new wiring kit, and route the harness clear of hot surfaces.
Test – Restore power, start a heat call, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No heat — burners never light on a call
Igniter does not glow, or glows weakly/unevenly
Visible cracks or breaks in the ceramic element
Intermittent ignition or repeated lockouts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS120SEAB0AAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120SEAB0AAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120SEAB0AAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu