What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120HSAA0AAA — OEM Ignitor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120HSAA0AAA — OEM Ignitor | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS120HSAA0AAA — OEM Ignitor | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS120HSAA0AAA — OEM Ignitor | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (PN 1171306) paired with its matching igniter wiring kit (PN 1188370) provides the spark-free ignition source for the ICP/Tempstar/Heil RGS120HSAA0AAA gas furnace. On a call for heat, the control board energizes the igniter, which glows white-hot to light the burners. Hot surface igniters are brittle and degrade with every heating cycle — the silicon carbide or nitride element develops hairline cracks, thins, and eventually fails open, leaving the furnace with no ignition source. The included wiring kit replaces aged, heat-stressed leads and connectors that can cause intermittent ignition or no-heat faults. Together they restore dependable first-try lighting.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot surface igniter with wiring kit
Brand	ICP / Tempstar / Heil
Fit	OEM
Application	Gas furnace burner ignition

Compatibility

Designed for the ICP/Tempstar/Heil RGS120HSAA0AAA gas furnace and related ICP-family models using the same hot surface igniter mount and harness. Confirm igniter shape and mounting block against the original before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter; shut off gas if servicing nearby.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift out the old igniter — handle by the ceramic base only.
Install — Mount the new igniter without touching the element, then connect the new wiring kit leads per your photo.
Test — Restore power and gas, initiate a heat call, and confirm the igniter glows and lights the burners on the first try.

Signs You Need a Replacement

No heat with an igniter that never glows.
Visible cracks or breaks in the igniter element.
Furnace locks out after several failed ignition attempts.
Intermittent ignition traced to brittle or corroded igniter leads.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS120HSAA0AAA — OEM Ignitor | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120HSAA0AAA — OEM Ignitor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120HSAA0AAA — OEM Ignitor | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu