What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102SEBB0AAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102SEBB0AAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS102SEBB0AAA — OEM | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS102SEBB0AAA — OEM | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) and matching igniter wiring kit (part 1188370) ignite the burners on the ICP/Tempstar/Heil RGS102SEBB0AAA gas furnace. On a call for heat, the control board energizes the igniter, which glows red-hot to light the gas as it crosses the burners. Hot surface igniters are brittle and degrade with every cycle — a cracked or aged igniter is the most common cause of no-heat furnace failures. This kit includes a fresh igniter and the correct connector/harness so you get a complete, reliable repair instead of fighting a corroded or mismatched plug.

Specifications

Spec	Value
Part Number	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter with Wiring Harness
Brand	ICP / Tempstar / Heil
Fit	OEM
Application	Furnace burner ignition

Compatibility

Designed for the ICP/Tempstar/Heil RGS102SEBB0AAA gas furnace and platform models using the same hot surface igniter and connector. Handle the igniter element by its base only — never touch the silicon nitride/carbide tip.

Installation Guide

Safety First — Disconnect power, verify zero voltage with a multimeter, and let the burner area cool fully.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter position and harness routing before disconnecting.
Remove — Unplug the igniter harness and unfasten the old igniter bracket, handling only the ceramic base.
Install — Mount the new igniter at the correct burner position, install the new wiring kit, and connect per your photo.
Test — Restore power, call for heat, and verify the igniter glows and lights the burners promptly.

Signs You Need a Replacement

Furnace blows cold air — no ignition on a call for heat
Visible crack or break in the igniter element
Igniter glows weakly or not at all
Brittle, corroded, or melted igniter connector

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS102SEBB0AAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102SEBB0AAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102SEBB0AAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu