What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102HSCB0AAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HSCB0AAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS102HSCB0AAA | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS102HSCB0AAA | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.70 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM kit includes the hot surface igniter (part 1171306) and the matching igniter wiring kit (part 1188370) for the ICP Tempstar/Heil RGS102HSCB0AAA gas furnace. The hot surface igniter is a heating element that glows red-hot when energized to ignite the gas at the burners on each heating cycle. The included wiring kit provides the correct OEM connector and leads, ensuring a clean, reliable connection to the furnace control board. Igniters are fragile and degrade over thousands of heating cycles — they crack, develop hot spots, and eventually fail to glow. A failed igniter is the single most common reason a gas furnace produces no heat.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot surface igniter + wiring harness
Brand	ICP / Tempstar / Heil
Function	Burner ignition

Compatibility

Designed for the ICP Tempstar Heil RGS102HSCB0AAA furnace and other ICP-family gas furnaces using this hot surface igniter. The included wiring kit adapts the igniter to the OEM control board connector. Verify your furnace uses a hot surface (not spark/pilot) ignition system.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring routing before removal. Handle the new igniter by its base only — never touch the element.
Remove — Unplug the igniter connector and unfasten the mounting screw, then withdraw the old igniter.
Install — Mount the new igniter without touching the element, then connect using the supplied wiring kit.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace produces no heat / no ignition
Igniter does not glow on a call for heat
Visible cracks or breaks in the element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS102HSCB0AAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102HSCB0AAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102HSCB0AAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu