ICP Hot Surface Igniter & Wiring Kit for RGS102HRAB0AAA — OEM Ignitor | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM kit pairs the hot surface igniter (part number 1171306) with its matching wiring kit (part number 1188370) for the ICP / Tempstar / Heil RGS102HRAB0AAA gas furnace. On each heat call the control board energizes the igniter, which glows red-hot to light the burners; the included wiring harness provides the correct plug and leads for a clean, no-splice connection. Hot surface igniters are the most common no-heat failure in modern furnaces — the silicon nitride or carbide element is brittle and degrades with every cycle until it cracks, develops hairline fractures, or simply fails to reach ignition temperature. Symptoms include the inducer running and gas valve clicking with no flame, repeated ignition lockouts, or a furnace that short-cycles on failed light-off. Replacing the igniter and harness together avoids reusing a heat-fatigued connector.
Specifications
| Spec | Value |
|---|---|
| Part Numbers | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter + Harness |
| Brand | ICP / Tempstar / Heil |
| Function | Burner ignition |
| Includes | Igniter element and wiring kit |
| Fits Model | RGS102HRAB0AAA |
Compatibility
Designed for the ICP-family RGS102HRAB0AAA and related RGS102-series furnaces that use this hot surface igniter. Confirm the igniter mounting and connector style against your existing part before ordering. Handle the ceramic element only by its base — skin oils and any contact can crack the brittle tip.
Installation Guide
- Safety First — Disconnect power and verify zero voltage with a multimeter; allow the igniter to cool fully.
- Access — Remove the burner-compartment service panel.
- Document — Photograph the igniter mounting and harness routing before disconnecting.
- Remove — Unplug the harness, remove the igniter mounting screw, and lift the old igniter out without touching the element.
- Install — Mount the new igniter by its base, route and connect the new wiring kit, and seat the connector fully.
- Test — Restore power, start a heat cycle, and confirm the igniter glows and the burners light promptly.
Signs You Need a Replacement
- Inducer runs and gas valve clicks but burners never light
- Visible cracks or breaks in the igniter element
- Repeated ignition lockouts or short-cycling on light-off
- Igniter glows weakly or not at all
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days