What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102HEBB0AAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HEBB0AAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS102HEBB0AAA — OEM | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS102HEBB0AAA — OEM | Ships Today
Brand: ICP
SKU: 1171306
Price: 55.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM kit includes the hot surface igniter (OEM part number 1171306) and its matching igniter wiring kit (OEM 1188370) for the ICP / Heil / Tempstar RGS102HEBB0AAA gas furnace. The hot surface igniter is a ceramic element that the control board energizes at the start of each heat cycle; it glows red-hot to ignite the gas at the burners. The wiring kit provides the correct OEM harness/connector to power the igniter cleanly. Igniters are a high-wear consumable — the element grows brittle with thousands of heat cycles and eventually cracks or fails to reach ignition temperature. When that happens the furnace will not light, leaving you with no heat. Replacing the igniter (and its wiring when the connector is corroded or brittle) restores reliable ignition.

Specifications

Spec	Value
OEM Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot surface igniter + wiring harness kit
Function	Ignites burners on call for heat
Brand	ICP (Heil / Tempstar / Comfortmaker family)
Fit	OEM

Compatibility

Designed for the ICP/Heil/Tempstar RGS102HEBB0AAA and related ICP-family furnaces specifying OEM igniter 1171306 and wiring kit 1188370. Handle the ceramic element by its base only — skin oils and rough handling shorten igniter life.

Installation Guide

Safety First — Disconnect electrical power and verify zero voltage with a multimeter; shut off gas if servicing near the burners.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring connector before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw(s), and carefully withdraw the old igniter without touching the new element.
Install — Mount the new igniter (handle by the base), connect the new wiring kit, and route the harness clear of hot surfaces.
Test — Restore power and gas, then run a heat cycle and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace will not ignite or produce heat
Igniter does not glow when the control calls for heat
Visible cracks, chips, or hot spots on the ceramic element
Corroded, melted, or brittle igniter connector/wiring

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$55.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS102HEBB0AAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102HEBB0AAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102HEBB0AAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu