What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101HDBB0AAAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101HDBB0AAAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter & Wiring Kit for RGS101HDBB0AAAA — OEM | Ships Today

Name: ICP Hot Surface Igniter & Wiring Kit for RGS101HDBB0AAAA — OEM | Ships Today
Brand: ICP
SKU: 1171306
Price: 46.80 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) with matching igniter wiring kit (part 1188370) is the factory ignition component for the ICP Tempstar Heil RGS101HDBB0AAAA gas furnace. On a call for heat, the control board energizes the igniter, which glows red-hot and ignites the gas at the burners. The included wiring kit supplies the correct connector and leads so the igniter mates cleanly to the harness. Hot surface igniters are fragile and degrade over thousands of heating cycles — the element thins, cracks, and eventually fails to reach ignition temperature, causing no-heat calls, delayed ignition, or a furnace that locks out after several failed ignition attempts. Replacing the igniter together with its wiring kit restores fast, reliable ignition.

Specifications

Spec	Value
Igniter Part Number	1171306 (IGNITOR)
Wiring Kit Part Number	1188370 (WIRING KIT IGNITER)
Type	Hot surface igniter
Brand	ICP / Tempstar / Heil
Application	Gas furnace burner ignition
Fitment	OEM, factory-correct

Compatibility

Fits the ICP Tempstar Heil RGS101HDBB0AAAA and related furnaces using this hot surface igniter. Match the element style and connector to your original before installing.

Installation Guide

Safety First — Turn off the furnace power and gas, then verify zero voltage with a multimeter. Let the igniter area cool completely.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter mounting position and harness connection before disconnecting.
Remove — Unplug the igniter lead, remove the mounting screw, and lift out the old igniter. Handle the new element only by its ceramic base — never touch the gray element.
Install — Mount the new igniter in the same position, connect the wiring kit lead to the harness, and confirm the element sits correctly over the burner.
Test — Restore gas and power, start a heat cycle, and verify the igniter glows and lights the burners promptly.

Signs You Need a Replacement

No heat — igniter does not glow on a call for heat
Cracked, chipped, or visibly worn element
Delayed ignition or rough/booming light-off
Furnace locks out after repeated failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter & Wiring...

$46.80

Frequently Asked Questions

Does this Igniter fit my ICP RGS101HDBB0AAAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101HDBB0AAAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101HDBB0AAAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu