ICP Hot Surface Igniter & Wiring Kit for RGS091SRAB0AAAA — OEM Fit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This genuine OEM hot surface igniter (part 1171306) with the matching igniter wiring kit (part 1188370) is the ignition source for the ICP / Tempstar / Heil RGS091SRAB0AAAA gas furnace. On a call for heat, the control board sends voltage to the igniter, which glows white-hot to light the burners. Hot surface igniters are fragile and degrade with every heating cycle — the silicon carbide or silicon nitride element develops micro-cracks and eventually fails open. The included wiring kit replaces brittle, heat-damaged igniter leads and the connector so you get a complete, reliable ignition repair rather than a partial fix. A failed igniter is the single most common cause of a furnace that runs the inducer and draws but never lights.
Specifications
| Spec | Value |
|---|---|
| Part Numbers | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter w/ Wiring Harness |
| Brand | ICP / Tempstar / Heil |
| Application | Furnace Burner Ignition |
| Fit | OEM Direct Replacement |
Compatibility
Direct-fit for the ICP-built RGS091SRAB0AAAA and shared Tempstar / Heil / Comfortmaker furnace platforms using this hot surface igniter and harness. Confirm against your existing igniter part number.
Installation Guide
- Safety First — Disconnect power and verify zero voltage with a multimeter. Never touch the igniter element with bare fingers — skin oils cause hot spots and early failure.
- Access — Remove the furnace burner compartment service panel.
- Document — Photograph the igniter mounting and wire routing before removal.
- Remove — Unplug the igniter harness, remove the mounting screw(s), and carefully withdraw the brittle igniter.
- Install — Mount the new igniter handling it only by the ceramic base, then connect the new wiring kit per your photo.
- Test — Restore power, start a heat cycle, and confirm the igniter glows and lights the burners.
Signs You Need a Replacement
- Furnace draws and inducer runs but burners never light
- Visible cracks or breaks in the igniter element
- No glow from the igniter on a call for heat
- Brittle, melted, or discolored igniter wiring
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days