What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102STCB0AAA — Furnace Ignitor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102STCB0AAA — Furnace Ignitor | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit with Wiring Harness for RGS102STCB0AAA — Furnace Ignitor | Ships Today

Name: ICP Hot Surface Igniter Kit with Wiring Harness for RGS102STCB0AAA — Furnace Ignitor | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part 1171306) with its matching wiring kit (part 1188370) provides the ignition source for the ICP/Heil/Tempstar RGS102STCB0AAA gas furnace. On each call for heat, the control board energizes the igniter, which glows red-hot to light the burners. Hot surface igniters are brittle and degrade with every cycle — they crack, develop hairline fractures, or simply fail to reach ignition temperature, leaving the furnace with no heat or a lockout fault. The included wiring kit replaces the connector and pigtail so you get a complete, plug-and-play repair rather than splicing onto an aged harness.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Includes	Igniter + Wiring Harness Kit
Application	Gas Furnace Ignition
Fit	OEM

Compatibility

Fits the ICP/Heil/Tempstar/Comfortmaker RGS102STCB0AAA gas furnace and related RGS-series models using the same hot surface igniter and connector. Match the igniter mounting and connector to your existing part.

Installation Guide

Safety First — Shut off gas, disconnect power at the switch and breaker, and verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the harness, remove the igniter mounting screw, and lift out the old igniter — handle only by the ceramic base, never the fragile element.
Install — Mount the new igniter, install the wiring kit connector, and route the harness per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Igniter does not glow on a call for heat
Visible cracks or breaks in the ceramic element
Furnace ignition lockout after several failed attempts
No heat with the blower and inducer running normally

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit with...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS102STCB0AAA — Furnace Ignitor | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102STCB0AAA — Furnace Ignitor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102STCB0AAA — Furnace Ignitor | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu