What igniter fits my ICP furnace?

The correct replacement for ICP model WFSR060A042A1 — Includes Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR060A042A1 — Includes Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFSR060A042A1 — Includes Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFSR060A042A1 — Includes Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 55.84 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit for the ICP/Heil/Tempstar WFSR060A042A1 furnace includes the igniter (part number 1176919) and its mounting bracket (part number 1184324). The hot surface igniter glows red-hot when energized to light the burner gas on every call for heat. Its element is repeatedly heated and cooled, making it one of the most common wear items in a gas furnace. When it fails, the inducer and gas valve may sequence but the burners never light, leaving you with no heat. Watch for a cracked or whitened element, no glow during ignition, or a furnace that locks out after repeated failed ignition attempts.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Application	Gas Furnace Burner Ignition
Fitment	OEM

Compatibility

Direct OEM replacement for ICP, Heil, Tempstar, Comfortmaker, and Carrier-family gas furnaces using model WFSR060A042A1 and related WFSR-series furnaces specifying igniter 1176919 with bracket 1184324.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screws, and carefully withdraw the old igniter and bracket. Handle by the ceramic base only — never touch the element.
Install — Mount the new igniter on the bracket, position it at the burner per your photo, and reconnect the wiring harness.
Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace inducer runs but burners never ignite
No visible glow during the ignition sequence
Cracked, chipped, or whitened igniter element
Repeated ignition lockout codes at the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$55.84

Frequently Asked Questions

Does this Igniter fit my ICP WFSR060A042A1 — Includes Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFSR060A042A1 — Includes Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFSR060A042A1 — Includes Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu