What igniter fits my ICP furnace?

The correct replacement for ICP model WFMR110C066B3 — Includes Bracket & HSI | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR110C066B3 — Includes Bracket & HSI | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFMR110C066B3 — Includes Bracket & HSI | Ships Today

Name: ICP Hot Surface Igniter Kit for WFMR110C066B3 — Includes Bracket & HSI | Ships Today
Brand: ICP
SKU: 1183455
Price: 48.04 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly is the factory ignition component for the ICP / Tempstar / Heil WFMR110C066B3 gas furnace. The hot surface igniter (HSI) glows to roughly 2,500°F when the control board calls for heat, igniting the gas as it exits the burners. This kit covers the full ignition group: OEM igniter 1176919, igniter mounting bracket 1183455, and the HSI snap-on valve harness 1176929 (36J24618). A cracked, eroded, or open igniter is the single most common cause of "no heat" no-light furnace calls. Igniters are brittle silicon nitride/carbide elements that degrade with every heating cycle, so replacement is routine maintenance on high-cycling furnaces.

Specifications

Spec	Value
Part Numbers	1176919, 1183455, 1176929
Type	Hot Surface Igniter (HSI)
Brand	ICP / Tempstar / Heil
Voltage	120V
Includes	Igniter, Mounting Bracket, Snap Valve Harness
Application	Gas Furnace

Compatibility

Engineered as a direct OEM-fit replacement for the ICP-family WFMR110C066B3 furnace and shared platform models sold under the Tempstar, Heil, Comfortmaker, and Arcoaire brands. Always confirm against your unit's rating plate before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter harness, remove the bracket screw, and lift out the old igniter. Handle only by the ceramic base — never touch the silicon element.
Install — Mount the new igniter on the bracket, set it to the correct flame position, and reconnect the harness per your photo.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

Furnace blower runs but no heat / burners never light
Igniter shows visible cracks, blistering, or white hot spots
Repeated lockouts after several ignition attempts
No glow visible through the sight port during a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP WFMR110C066B3 — Includes Bracket & HSI | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFMR110C066B3 — Includes Bracket & HSI | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFMR110C066B3 — Includes Bracket & HSI | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu