What igniter fits my ICP furnace?

The correct replacement for ICP model WFMR110C048B3 — 120V HSI with Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR110C048B3 — 120V HSI with Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFMR110C048B3 — 120V HSI with Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFMR110C048B3 — 120V HSI with Bracket | Ships Today
Brand: ICP
SKU: 1183455
Price: 44.20 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) kit is the factory ignition component for the ICP Tempstar Heil WFMR110C048B3 gas furnace. The kit includes the igniter (OEM 1176919) and its mounting bracket (OEM 1183455), with the matching snap-action valve igniter assembly (OEM 1176929) referenced for this model. The hot surface igniter operates on 120V and glows red-hot to ignite the burner gas at the start of each heating cycle. When an igniter cracks, carbon-fouls, or loses resistance, the furnace will not light — you'll hear the inducer and gas valve cycle, but no flame. Replacing a failed igniter is one of the most common no-heat repairs.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
Valve/Igniter Assembly	1176929
Type	Hot Surface Igniter (HSI)
Voltage	120V
Brand	ICP / Tempstar / Heil
Fitment	OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP Tempstar Heil WFMR110C048B3 furnace and shared ICP family equipment (Comfortmaker, Heil, Tempstar) using the same igniter assembly. Always verify your OEM part number against the unit's rating plate before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw(s), and lift out the old igniter and bracket. Handle by the ceramic base only — never touch the silicon-carbide element.
Install — Mount the new igniter and bracket in the exact position, then reconnect the harness per your photo.
Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace runs the inducer but never lights the burners (no-heat call).
Visible cracks, white spots, or broken element on the igniter.
Igniter does not glow during the ignition sequence.
Repeated lockouts after several failed ignition attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP WFMR110C048B3 — 120V HSI with Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFMR110C048B3 — 120V HSI with Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFMR110C048B3 — 120V HSI with Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu