What igniter fits my ICP furnace?

The correct replacement for ICP model WFML070A036B1 — Includes Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFML070A036B1 — Includes Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFML070A036B1 — Includes Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFML070A036B1 — Includes Bracket | Ships Today
Brand: ICP
SKU: 1183455
Price: 45.44 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly is the ignition source for the ICP/Tempstar/Heil WFML070A036B1 gas furnace. On a call for heat, the integrated furnace control sends line voltage to the igniter, which glows red-hot (typically 1,800–2,500°F) to ignite the gas at the burners. This listing covers the igniter (OEM 1176919), its mounting bracket (OEM 1183455), and the related HSI snap/valve hardware (OEM 1176929). Hot surface igniters are brittle silicon nitride/carbide elements that fatigue with every heat cycle. A failed igniter is one of the most common reasons a furnace produces no heat, leaving the system stuck in pre-ignition or lockout.

Specifications

Spec	Value
Part Numbers	1176919 (Igniter), 1183455 (Bracket), 1176929 (HSI Snap/Valve)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Fitment	OEM
Application	Gas Furnace Ignition

Compatibility

Engineered for the ICP/Tempstar/Heil WFML070A036B1 furnace and shared platform models using the same burner and ignition assembly. Always confirm your model and serial before ordering.

Installation Guide

Safety First — Shut off the gas supply and disconnect electrical power. Verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter position, bracket orientation, and wire routing before disconnecting.
Remove — Unplug the igniter connector, remove the bracket screw(s), and lift the old igniter out. Handle by the ceramic base only — never touch the element.
Install — Mount the new igniter on the bracket at the correct depth over the burner, reconnect the harness per your photo, and secure the bracket.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and burners light cleanly.

Signs You Need a Replacement

Furnace runs the inducer but burners never light (no heat).
Visible cracks, chips, or white spots on the igniter element.
Igniter does not glow during the ignition sequence.
Control board cycles into lockout after several failed ignition attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WFML070A036B1 — Includes Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFML070A036B1 — Includes Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFML070A036B1 — Includes Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu