What igniter fits my ICP furnace?

The correct replacement for ICP model WFML045A024B2 — With Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFML045A024B2 — With Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFML045A024B2 — With Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFML045A024B2 — With Bracket | Ships Today
Brand: ICP
SKU: 1183455
Price: 58.44 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly for the ICP Tempstar Heil WFML045A024B2 furnace includes the igniter (part #1176919), its mounting bracket (#1183455), and the HSI snap valve (#1176929, ref 36J24618). The hot surface igniter glows to roughly 2,000°F to ignite the gas burners on each heat call. HSI elements are brittle and degrade with every cycle — they are the single most common furnace failure point. A cracked or worn igniter is the usual reason a furnace clicks, the inducer runs, but no flame ever lights.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
Valve Part Number	1176929 (36J24618)
Type	Hot Surface Igniter
Brand	ICP
Control Voltage	120V

Compatibility

Designed for the ICP Tempstar Heil WFML045A024B2 furnace and compatible ICP-family gas furnaces (Tempstar, Heil, Comfortmaker) using the same HSI ignition platform. Verify the igniter footprint and bracket orientation against your existing part.

Installation Guide

Safety First — Shut off gas and electrical power, then verify zero voltage with a multimeter.
Access — Remove the burner compartment access panel.
Document — Photograph the igniter position, bracket, and wiring before disconnecting.
Remove — Unplug the igniter connector and unscrew the igniter/bracket from the burner assembly. Handle the element by its base only — never touch the silicon carbide tip.
Install — Mount the new igniter and bracket, reconnect the wiring harness per your photo.
Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace runs the inducer but never lights — no glow at the igniter
Visible cracks, chips, or hot spots on the igniter element
Intermittent ignition or repeated lockouts after several flashes
Igniter glows weakly or unevenly

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$58.44

Frequently Asked Questions

Does this Igniter fit my ICP WFML045A024B2 — With Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFML045A024B2 — With Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFML045A024B2 — With Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu