What igniter fits my ICP furnace?

The correct replacement for ICP model WFEL090B024A1 — OEM 1176919 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL090B024A1 — OEM 1176919 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFEL090B024A1 — OEM 1176919 | Ships Today

Name: ICP Hot Surface Igniter Kit for WFEL090B024A1 — OEM 1176919 | Ships Today
Brand: ICP
SKU: 1183455
Price: 50.70 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This ICP hot surface igniter (OEM part #1176919) lights the burners on your ICP/Heil/Tempstar WFEL090B024A1 gas furnace. On a heat call the control board energizes the igniter; it glows white-hot to ignite gas at the burners as the valve opens. This listing covers the OEM igniter along with its mounting bracket (#1183455) and the related HSI snap/valve assembly hardware (#1176929) referenced for this model. Hot surface igniters are brittle and wear out — a furnace that clicks and tries to start but never lights almost always has a cracked or open igniter.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
Valve/HSI Hardware	1176929
Type	Hot surface igniter (HSI)
Brand	ICP (Heil / Tempstar)
Fit	OEM direct replacement

Compatibility

Direct-fit replacement for the ICP, Heil, and Tempstar WFEL090B024A1 furnace and other ICP-family WFEL090 furnaces using igniter 1176919. Verify the OEM part markings before installing.

Installation Guide

Safety First — Disconnect power at the breaker and furnace switch, then verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position, bracket orientation, and connector before removal.
Remove — Unplug the igniter connector, remove the bracket screws, and lift out the old igniter — handle only by the ceramic base, never the element.
Install — Mount the new 1176919 igniter and bracket, reconnect the lead, and confirm correct alignment over the burner.
Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace clicks/attempts ignition but burners never light
Visible crack or break in the ceramic igniter element
Igniter no longer glows on a heat call
Open circuit / no continuity when tested with a multimeter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP WFEL090B024A1 — OEM 1176919 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFEL090B024A1 — OEM 1176919 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFEL090B024A1 — OEM 1176919 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu