What igniter fits my ICP furnace?

The correct replacement for ICP model WFEL070B048A1 — HSI + Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL070B048A1 — HSI + Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFEL070B048A1 — HSI + Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFEL070B048A1 — HSI + Bracket | Ships Today
Brand: ICP
SKU: 1183455
Price: 54.60 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly fits the ICP / Tempstar / Heil WFEL070B048A1 furnace and includes the igniter (part #1176919), its mounting bracket (part #1183455), and the matched HSI snap-on valve component (part #1176929, ref 36J24618). On a call for heat, the control board energizes the igniter, which glows red-hot to ignite the gas at the burners. A cracked, weakened, or burnt-out igniter is the single most common cause of a furnace that clicks, runs the inducer, but never lights — leaving you with no heat. Igniters are fragile silicon-carbide or nitride elements that degrade over thousands of heating cycles. This OEM kit restores reliable ignition with the correct resistance and mounting geometry.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
HSI Valve Component	1176929 (36J24618)
Type	Hot Surface Igniter (HSI)
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Ignition
Fit	OEM Replacement

Compatibility

A direct OEM replacement for the ICP, Tempstar, Heil, and Comfortmaker family WFEL070B048A1 furnace. Match the igniter part number 1176919 and its bracket 1183455 to your existing assembly before installing. Handle the element only by its ceramic base — never touch the glowing tip.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter position, bracket orientation, and wire harness connector.
Remove — Unplug the igniter connector, remove the bracket screw, and lift out the old igniter without touching the element.
Install — Mount the new igniter and bracket so the tip aligns over the burner, then reconnect the harness per your photo.
Test — Restore power, call for heat, and confirm the igniter glows bright and the burners light promptly.

Signs You Need a Replacement

Furnace runs the inducer but burners never light — no heat
Visible cracks, chips, or white spots on the igniter element
Igniter glows weakly or not at all on a call for heat
Repeated ignition lockouts after several retry attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$54.60

Frequently Asked Questions

Does this Igniter fit my ICP WFEL070B048A1 — HSI + Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFEL070B048A1 — HSI + Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFEL070B048A1 — HSI + Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu