What igniter fits my ICP furnace?

The correct replacement for ICP model WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today

Name: ICP Hot Surface Igniter Kit for WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today
Brand: ICP
SKU: 1183455
Price: 57.20 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (ICP part number 1176919, with mounting bracket 1183455 and associated HSI valve component 1176929) ignites the burner gas on your ICP/Tempstar/Heil WFEL045A036A1 gas furnace. The igniter glows red-hot on a heat call to light the burners. Hot surface igniters are brittle and wear out — when one cracks or loses resistance, the furnace will not light, locks out, and may flash an ignition-failure fault. This exact OEM igniter assembly restores fast, reliable ignition.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
HSI Valve Component	1176929
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Furnace burner ignition
Fitment	OEM direct replacement

Compatibility

Direct factory replacement hot surface igniter for the ICP / Tempstar / Heil WFEL045A036A1 gas furnace. Confirm your existing igniter and bracket part numbers before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position, bracket, and wiring before disconnecting.
Remove — Unplug the igniter connector, remove the bracket screw, and carefully lift out the old igniter — never touch the silicon-carbide element with bare fingers.
Install — Mount the new 1176919 igniter on bracket 1183455, position it over the burner per your photo, and reconnect the lead.
Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace will not ignite; no glow at the igniter
Visible cracks or breaks in the igniter element
Ignition-failure lockout or flashing fault code
Delayed ignition or burner roll-out on startup

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$57.20

Frequently Asked Questions

Does this Igniter fit my ICP WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFEL045A036A1 — OEM 1176919 Igniter, Bracket & Valve | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu