ICP Hot Surface Igniter Kit for WFAR100C048C1 — Includes Igniter Bracket | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter kit is the factory-correct ignition component for the ICP/Tempstar/Heil WFAR100C048C1 gas furnace. The kit includes igniter element 1176919 and igniter mounting bracket 1184324, giving you everything needed for a complete, drop-in replacement. The hot surface igniter (HSI) glows to roughly 2,000°F when the control board calls for heat, lighting the gas at the burner. When an igniter cracks, weakens, or burns out, the furnace will fail to light, short-cycle, or lock out after several failed ignition attempts. Because the silicon carbide (or silicon nitride) element is brittle, the matched bracket ensures correct alignment in the burner flame path so the new igniter reaches and lights the gas reliably.
Specifications
| Spec | Value |
|---|---|
| Part Numbers | 1176919 (Igniter), 1184324 (Bracket) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Fit | OEM Direct Replacement |
| Application | Gas Furnace Ignition |
| Voltage | 120V |
Compatibility
Engineered specifically for the ICP/Tempstar/Heil model WFAR100C048C1 furnace and shared platform models from Comfortmaker and other ICP family brands using the same burner assembly. Always confirm your existing igniter and bracket part numbers before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas supply.
- Access — Remove the furnace service / burner compartment panel.
- Document — Photograph the igniter wiring and bracket position before disconnecting.
- Remove — Unplug the igniter connector, unscrew the bracket, and carefully withdraw the old igniter without touching the element.
- Install — Mount the new igniter on bracket 1184324, position it in the burner flame path per your photo, and reconnect the harness. Handle the element by the ceramic base only.
- Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and lights the burners.
Signs You Need a Replacement
- Furnace clicks and tries to start but never lights
- Igniter does not glow or glows dimly/unevenly
- Visible cracks, blistering, or white spots on the element
- Control board lockout after 3+ failed ignition attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days