What igniter fits my ICP furnace?

The correct replacement for ICP model WFAR080B048C1 — With Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR080B048C1 — With Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFAR080B048C1 — With Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFAR080B048C1 — With Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 55.84 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1176919) and its matching mounting bracket (part #1184324) ignite the gas burners on your ICP WFAR080B048C1 furnace. On a call for heat, the control board energizes the igniter, which glows white-hot to light the main burners. Hot surface igniters are brittle silicon-carbide or silicon-nitride elements that crack and degrade over time. A failed igniter is one of the most common causes of no-heat calls: the inducer runs, the gas valve clicks, but the burners never light and the furnace locks out. Replacing the igniter — along with the bracket that holds it in precise alignment with the burner — restores reliable ignition.

Specifications

Spec	Value
OEM Part Numbers	1176919 (Igniter), 1184324 (Igniter Bracket)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Burner Ignition
Includes	Igniter + Mounting Bracket

Compatibility

Directly fits the ICP / Tempstar / Heil WFAR080B048C1 gas furnace. The igniter and bracket are matched components for this furnace family — installing both ensures correct positioning over the burner for clean, repeatable ignition.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter wiring and bracket position before removing.
Remove — Unplug the igniter connector and unscrew the old igniter and bracket. Handle the ceramic element only by its body, never the hot surface.
Install — Mount the new bracket and igniter, aligning the element over the burner per your photo, then reconnect the plug.
Test — Restore gas and power and verify the igniter glows and burners light on a heat call.

Signs You Need a Replacement

Furnace ignites no flame and locks out after several attempts
Igniter visibly cracked, chipped, or no longer glowing
Inducer and gas valve cycle but burners never light
Intermittent no-heat that worsens over time

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$55.84

Frequently Asked Questions

Does this Igniter fit my ICP WFAR080B048C1 — With Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFAR080B048C1 — With Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFAR080B048C1 — With Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu