What igniter fits my ICP furnace?

The correct replacement for ICP model WFAR040A030B1 — with Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR040A030B1 — with Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for WFAR040A030B1 — with Bracket | Ships Today

Name: ICP Hot Surface Igniter Kit for WFAR040A030B1 — with Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 49.34 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM hot surface igniter assembly for the ICP/Tempstar/Heil WFAR040A030B1 furnace, including the igniter (part number 1176919) and its mounting bracket (part number 1184324). On every call for heat the control board energizes the igniter, which glows red-hot to light the gas burners. Hot surface igniters are brittle silicon-carbide or silicon-nitride elements that crack from thermal cycling, vibration, or being touched by bare hands. A failed igniter is one of the most common causes of no-heat: the inducer runs, the gas valve waits, but the burners never light and the furnace locks out. Replacing both the igniter and bracket together restores reliable ignition.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Application	Furnace Burner Ignition

Compatibility

Direct OEM replacement kit for the ICP, Tempstar, Heil, and Comfortmaker WFAR040A030B1 model and other units originally fitted with igniter 1176919 and bracket 1184324. Confirm the igniter element style and bracket footprint against your existing assembly before installing.

Installation Guide

Safety First — Disconnect power, shut off the gas, and verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position, bracket alignment, and wiring before removing.
Remove — Unplug the igniter lead and unscrew the old igniter and bracket — handle only by the ceramic base, never the element.
Install — Mount the new bracket and igniter so the element sits in the burner flame path, then reconnect the lead.
Test — Restore gas and power and confirm the igniter glows and the burners light on a heat call.

Signs You Need a Replacement

No heat — burners never light despite the blower and inducer running
Furnace locks out after several ignition attempts
Visible crack, chip, or break in the igniter element
Igniter no longer glows when energized

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$49.34

Frequently Asked Questions

Does this Igniter fit my ICP WFAR040A030B1 — with Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFAR040A030B1 — with Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFAR040A030B1 — with Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu