What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignition set for the ICP / Tempstar / Heil RGS150SFAA0AKAA gas furnace includes the hot surface ignitor (part number 1171306) and its matching igniter wiring kit (part number 1188370). On each call for heat the control board energizes the ignitor, which glows red-hot to light the burner gas; the wiring kit provides the correct OEM connector and leads to power it. Hot surface ignitors are brittle and wear out — a hairline crack or eroded element is one of the most common causes of furnace no-heat lockouts. Replacing the ignitor along with worn wiring eliminates intermittent connection faults.

Specifications

Spec	Value
Part Numbers	1171306 (ignitor), 1188370 (wiring kit)
Type	Hot surface igniter + wiring harness
Brand	ICP (Tempstar / Heil)
Application	Gas furnace burner ignition
Fitment	OEM replacement

Compatibility

Designed for the ICP RGS150SFAA0AKAA and shared-platform Tempstar, Heil, and Comfortmaker gas furnaces using the same ignition system. Verify ignitor mounting and connector against the original before installing.

Installation Guide

Safety First — Shut off gas and power; verify zero voltage with a multimeter.
Access — Remove the burner/blower compartment door.
Document — Photo the ignitor position and harness routing before disconnecting.
Remove — Unplug the wiring connector and unscrew the ignitor bracket. Handle the element by the ceramic base only — never touch the silicon-carbide tip.
Install — Mount the new ignitor, connect the new wiring kit, and route leads clear of hot surfaces.
Test — Restore gas and power, call for heat, and confirm the ignitor glows and the burner lights within the trial-for-ignition period.

Signs You Need a Replacement

Furnace ignites then locks out on no-flame
Ignitor shows cracks or no longer glows
Intermittent no-heat tied to a loose or melted connector
Out-of-range resistance reading on the element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150SFAA0AKAA — OEM Ignitor + Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu