What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Kit for RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today

Name: ICP Hot Surface Igniter Kit for RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 55.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter kit for the ICP / Tempstar / Heil RGS150LTCA0AAAA gas furnace, including igniter part number 1171306 and the matching wiring kit 1188370. On a heat call, the control board energizes the igniter; its element heats to a glowing hot surface that lights the gas at the burners. Hot surface igniters are brittle and wear out — micro-cracks, contamination from oily fingerprints, and normal aging all lead to failure. A bad igniter is one of the most common no-heat causes: the furnace tries to ignite, fails, and locks out. The included wiring kit ensures a clean, correct electrical connection.

Specifications

Spec	Value
Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter Kit
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fits Model	RGS150LTCA0AAAA
Application	Gas furnace burner ignition
Fitment	OEM replacement

Compatibility

Fits the ICP-family RGS150LTCA0AAAA and the related RGS150 platform sold under Tempstar, Heil, and Comfortmaker. Verify OEM numbers 1171306 and 1188370 against your furnace before ordering.

Installation Guide

Safety First — Disconnect power to the furnace and verify zero voltage with a multimeter.
Access — Remove the burner/service panel to reach the igniter at the burner assembly.
Document — Photograph the igniter position, bracket, and wiring/connector routing.
Remove — Unplug the igniter harness, remove the mounting screw, and withdraw the old igniter — handle the new element by its base only, never the ceramic/element.
Install — Mount the new igniter so it sits correctly in the flame path, install the included wiring kit, and connect per your photo.
Test — Restore power, call for heat, and confirm the igniter glows and lights the burners cleanly.

Signs You Need a Replacement

No heat — furnace tries to light, fails, and locks out
Igniter does not glow on a heat call
Visible cracks, blistering, or breakage in the igniter element
Repeated ignition-failure fault codes from the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Kit for ...

$55.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150LTCA0AAAA — OEM 1171306 with Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu