ICP Hot Surface Igniter Kit for RGS150LSCB0AAAA — With Wiring | Ships Today

Overview

This OEM hot surface igniter kit for the ICP/Tempstar/Heil RGS150LSCB0AAAA package unit includes the igniter (P/N 1171306) and the matching igniter wiring kit (P/N 1188370). On a heat call the control board sends voltage to the igniter, which glows red-hot to light the burners; the wiring kit provides the correct connector and leads for a clean, reliable splice. Hot surface igniters are brittle and degrade with every cycle — a cracked or open igniter is one of the most common causes of no-heat calls. Replacing it with the wiring kit ensures a solid connection and proper ignition.

Specifications

Compatibility

Fits the ICP/Tempstar/Heil RGS150LSCB0AAAA and related models using this hot surface igniter and connector. Verify the igniter mounting and connector style against your original.

Installation Guide

1. Safety First — Disconnect power and verify zero voltage with a multimeter; shut off the gas supply.
2. Access — Remove the burner compartment service panel.
3. Document — Photo the igniter position and wiring before removal.
4. Remove — Unplug the igniter lead, remove the mounting screw, and lift out the old igniter (handle by the base only — never touch the element).
5. Install — Mount the new igniter, then connect using the new wiring kit, keeping the element clean and clear of the burner.
6. Test — Restore gas and power, call for heat, and confirm the igniter glows and burners light.

Signs You Need a Replacement

• No-heat call with no igniter glow
• Visible cracks or breaks in the igniter element
• Open circuit on a resistance (ohm) test
• Repeated ignition lockouts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.